Schneider Rm35-tm50mw Phase Control Relay

Schneider Phase Control Relay Product Features Product series: Harmony Control Relays Product or component type: 3-phase control relay Relay type: Motor temperature control relay Product-specific application: For 3-phase supply Relay name: RM35TM Parameters monitored by the relay: Phase sequence Motor temperature with PTC probe Phase failure detection Time delay: Fixed 0.3 s Switching capacity in VA: 1250 VA Measurement range: 208…480 V voltage AC 0…20 Ohm short circuit detection Contact type and arrangement: 2 NO Control circuit voltage (Uc): 24…240 V Supplementary Features Reset time: 10000 ms output Maximum switching voltage: 250 V AC 250 V DC Minimum switching current: 10 mA at 5 V DC Maximum switching current: 5 A AC 5 A DC Supply voltage limits: 20.4?264 V AC 20.4?264 V DC Power consumption in VA: 0?4 VA at 24?240 V AC Power consumption: 0.5 W DC Control circuit frequency: 50…60 Hz +/- 10 % Resistance between terminals: 602 mOhm Output contacts: 2 NO Nominal output current: 5 A Measurement voltage limits: 176?528 V AC Delay at power up: 500 ms Voltage range: 176.. .528 V Response time: > 50 ms (input Y1 (contactY1-T1) and push button) Control circuit voltage: 500 MOhm at 500 V between DC supply and relay output conforming to IEC 60255-5 > 500 MOhm at 500 V Between DC measurement and relay output conforming to IEC 60664-1 > 1 MOhm at 500 V Between DC supply and measurement conforming to IEC 60255-5 > 500 MOhm at 500 V DC supply and relay output conforming to IEC 60664-1 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 [Ui] nominal insulation voltage : 400 V conforming to IEC 60664- 1 Supply frequency : 50/60 Hz +/- 10 % Operating position : Without any position Connections – terminals : Screw terminals, 1 x 0.5…1 x 4 mm? (AWG 20…AWG 11) solid cable without end Screw terminals, 2 x 0.5…2 x 2.5 mm? (AWG 20…AWG 14) solid cable without end Screw terminals, 1 x 0.2…1 x 2.5 mm? (AWG 24) …AWG 12) flexible With cable end Screw terminals, 2 x 0.2…2 x 1.5 mm? (AWG 24…AWG 16) flexible With cable end Tightening torque : 0.6?1 Nm conforming to IEC 60947-1 Housing material : Self-extinguishing plastic Local signaling : Power ON: LED (green) Relay phase (R2): LED (yellow) Temperature of the relay (R1): LED (yellow) Mounting support : 35 mm symmetrical DIN rail conforming to EN /IEC 60715 Electrical durability: 10000 cycles Mechanical durability: 30000000 cycles Operating speed: