Schneider Re17-rmmu 0.1sec-100h Time Delay Relay

Schneider Time Delay Relay Product Features Product series: Harmony Timer Relays Product or component type: Multifunction relay Digital output type: Relay Width: 17.5 mm Product group: RE17R Time delay type: Power on-delay On-delay and off-delay Interval Shutdown delay Symmetrical flashing Time delay interval: 6…60 min 1…10 h 0.1…1 s 1…10 s 1…10 min 10…100 h 6. ..60 s Rated output current: 8 A Supplementary Features Contact type and arrangement: 1 K/A Contact material: Cadmium-free Height: 90 mm Depth: 72 mm Control type: Selector switch front panel [Us] nominal supply voltage: 24.. .240 V AC 50/60 Hz 24 V DC Voltage range: 0.85…1.1 Us Supply frequency: 50…60 Hz +/- 5 % Release of input voltage: 10 V Connections – terminals: Screw terminals, 1 x 0.5…1 x 3.3 mm? (AWG 20…AWG 12) solid without cable end Screw terminals, 2 x 0.5…2 x 2.5 mm? (AWG 20.. .AWG 14) solid without cable end Screw terminals, 1 x 0.2…1 x 2.5 mm? (AWG 24…AWG 14) flexible Screw terminals with cable end, 2 x 0.2…2 x 1 .5 mm? (AWG 24…AWG 16) flexible Cable end Tightening torque : 0.6?1 Nm conforming to IEC 60947-1 Housing material : Self-extinguishing Repeat accuracy : +/- 0.5 % conforming to IEC 61812- 1 Temperature deviation: +/- 0.05%/?C Voltage deviation: +/- 0.2%/V Setting accuracy of time delay: +/- 10% of full scale at 25 ?C conforming to IEC 61812- 1 Control signal pulse width: 100 ms with parallel load typical 30 ms typical Insulation resistance: 100 MOhm at 500 V DC conforming to IEC 60664-1 Reset time: 120 ms typical at de-energization Load factor: 100 % Power consumption in VA: 0? 32 VA at 240 V AC Power consumption in W: 0.6 W at 24 V DC Minimum switching current: 10 mA at 5 V DC Maximum switching current: 8 A AC/DC Maximum switching voltage: 250 V AC Breaking capacity : 2000 VA Operating frequency : 10 Hz Electrical endurance : 100000 cycles for resistive load (8 A at 250 V AC maximum) Mechanical endurance : 10000000 cycles Dielectric strength : 2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812- 1 [Uimp] nominal impulse withstand voltage : 1.2/50 ?s for 5 kV Power on delay : 100 ms Marking : CE Jump distance : 4 kV/3 conforming to IEC 60664-1 Safety reliability data : B10d = 270000 MTTFd = 296 ,8 years Mounting position: Any position attached to normal vertical mounting plane Mounting bracket: 35 mm DIN rail conforming to EN/IEC 60715 Local signaling: Fixed for LED indication: relay energized, no running timing LED indication 80% ON and 20% OFF blinking for: timing in progress LED indicator pulsing for 5% ON and 95% OFF: relay de-energized, no timing in progress (except Di-D, Li-L function) Product weight : 0.07 kg Time delay type : A, Ac , At, B, Bw, C, D, Di, H, Ht Functionality: Multifunctional Compatibility code: RE17 Environmental Conditions Immunity to microbreaks: 20 ms Standards: 2006/95/EC 2004/108/EC IEC 61812-1 EN 61000 -6-2 EN 61000-6-3 EN 61000-6-4 EN 61000-6-1 Product certificates:CSA GL CULus Storage ambient conditions : -30?60 ?C Nominal operating ambient temperature : -20?60 ?C IP degree of protection : IP20 conforming to IEC 60529 (terminal block) conforming to IP40 IEC 60529 (enclosure) conforming to IP50 IEC 60529 (front panel) Vibration resistance : 20 m/s? (f= 10?150 Hz) conforming to IEC 60068-2-6 Impact resistance : 15 gn to 11 ms conforming to IEC 60068-2-27 Relative humidity : 93 % non-condensing ‘ conforming to IEC 60068-2-30 Electromagnetic compatibility: Electrostatic discharge immunity test: test level: 6 kV (in contact) conforming to level 3 IEC 61000-4-2 Electrostatic discharge immunity test: test level: 8 kV (in air) conforming to level 3 conforming to IEC 61000-4-2 Susceptibility to electromagnetic fields: test level: 10 V/m (80 MHz to 1 GHz) level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test: test level: 1 kV (capacitive coupling clip) level 3 conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test: test level: 2 kV (direct) level 3 conforming to IEC 61000-4-4 1.2/50 ?s shock waves immunity test: test level: 1 kV (differential mode) level 3 conforming to IEC 61000-4-5 1.2/50 ?s shock waves immunity test: test level: 2 kV (common mode) level 3 conforming to IEC 61000-4-5 Conducted RF interruptions: test level: 10 V (0.15…80 MHz) level 3 conforming to IEC 61000-4-6 Voltage sags and interruptions immunity test: test level: 0% (1 cycle) conforming to IEC 61000-4- 11 Voltage sags and interruptions immunity test: test level: 70% (25/30 cycles) conforming to IEC 61000-4-11 Conducted and radiated emissions: class B conforming to EN 5502280 MHz) level 3 conforming to IEC 61000-4-6 Voltage sags and interruptions immunity test: test level: 0 % (1 cycle) conforming to IEC 61000-4-11 Voltage sags and interruptions immunity test: test level: 70 % ( 25/30 cycle) conforming to IEC 61000-4-11 Conducted and radiated emissions: class B conforming to EN 5502280 MHz) level 3 conforming to IEC 61000-4-6 Voltage sags and interruptions immunity test: test level: 0 % (1 cycle) conforming to IEC 61000-4-11 Voltage sags and interruptions immunity test: test level: 70 % ( 25/30 cycle) conforming to IEC 61000-4-11 Conducted and radiated emissions: class B conforming to EN 55022