Schneider Gv2-p16 Motor Protection Switch

Schneider Motor Protection Switch Product Features Product series: TeSys GV2 Series: TeSys TeSys Deca Product group: GV2P Product name: TeSys GV2 TeSys Deca Product or component type: Circuit breaker Device application: Motor Trip unit technology: Thermal Magnetic Supplementary Features Pole definition: 3P Network type: AC Usage category: AC-3 conforming to IEC 60947-4-1 Category A conforming to IEC 60947-2 Network frequency: 50/60 Hz conforming to IEC 60947-4-1 Fixing mode: 35 mm symmetrical DIN rail: with clips Panel: with screws (with 2 x M4 screws) Operating position: Any position Motor power kW: 5.5 kW at 400/415 V AC 50/60 Hz 7.5 kW at 500 V AC 50 /60 Hz 9 kW at 690 V AC 50/60 Hz 11 kW at 690 V AC 50/60 Hz Breaking capacity: 100 kA Icu at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 kA Icu at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 50 kA Icu at 440 V AC 50/60 Hz conforming to IEC 60947-2 6 kA Icu at 690 V AC 50/60 Hz conforming to IEC 60947-2 42 kA Icu at 500 V AC 50/60 Hz conforming to IEC 60947-2 [Ics] nominal service short-circuit breaking capacity : 100 % at 690 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 230/240 V AC 50/60 Hz conforming to IEC 60947-2 100 % at 400/415 V AC 50/60 Hz conforming to IEC 60947-2 75 % at 500 V AC 50/60 Hz conforming to IEC 60947-2 75 % at 440 V AC 50/60 Hz conforming to IEC 60947-2 Control type : Rotary knob [In] nominal current : 14 A Thermal Setting Range : 9?14 A Magnetic tripping current : 170 A [Ue ] nominal operating voltage : 690 V AC 50/60 Hz conforming to IEC 60947-2 [Ui] nominal insulation voltage : 690 V AC 50/60 Hz conforming to IEC 60947-2 [Ith] classical open air thermal current : 14 A ‘ conforming to IEC 60947-4-1 [Uimp] nominal impulse withstand voltage : 6 kV conforming to IEC 60947-2 Power dissipation per pole : 2.5 W Mechanical endurance : 100000 cycles Electrical endurance : 100000 cycles for AC-3 at 440 V Maximum duty rate : 25 cyc/h Rated duty : Continuous conforming to IEC 60947-4-1 Tightening torque : above 1.7 Nm screw clamp terminals Compliance with insulation : Yes conforming to IEC 60947-1 Phase fault sensitivity : Yes conforming to IEC 60947 -4-1 Height: 89 mm Width: 45 mm Depth: 97 mm Color: Dark gray Environmental Conditions Standards: EN/IEC 60947-2 EN/IEC 60947-4-1 UL 60947-4-1 CSA C22.2 No 60947 -4-1 Product certifications: IECEE CB Scheme UL CSA CCC EAC ATEX BV LROS (Lloyds register of shipping) DNV-GL RINA UKCA Preventive maintenance: TH IP degree of protection: IP20 conforming to IEC 60529 IK degree of protection: IK04 Ambient air for operation temperature: -20?60 ?C Storage ambient conditions: -40?80 ?C Fire resistance: 960 ?C conforming to IEC 60695-2-1 Working altitude: 2000 m