Inoksan Bym052t Dishwasher, 500 Plates/Hour, with Drain and Rinse Pump

Inoksan Dishwasher, 500 Plates/h, with Drain and Rinse Pump, Dish washing machine, 540 Tb/h capacity, Electronic, 4.95 kW, 230V 1N AC 50Hz. Dimensions: 600x600x830 mmCassette capacity: 40 Pcs/hCup capacity: 1440 Pcs /hTray capacity: 360 Pcs/hTank capacity: 20 Lt. Boiler capacity: 6 Lt. Boiler power: 4.5 kW Engine: 0.45 kW Tank Heater: 2.7 kW, Cassettes: Imported (1 cutlery + 1 plate) AISI 304 quality 18/8 Cr-Ni stainless steel sheet on the active surfaces of the machine. Polisher pump and drain pump are standard. The system is fully automatic, different stages of the washing cycle can be controlled with an electronic card. It is possible to monitor the washing and rinsing water temperatures from the device control panel with 2 separate NTC probes. It has 3 different washing programs (90/120/180 seconds) depending on the type of dishes and the degree of pollution. ?C or ?F compatible 3-digit temperature display. Washing-rinsing times and temperatures can be changed from the electronic card service menu according to the user’s request. When the washing process is completed, it automatically switches to rinsing and provides rinsing with 85?C water coming from the boiler. Thanks to the thermo-stop rinsing feature, you wait for the rinsing water to heat up during the washing process and clean the surfaces washed with 85?C water. Guarantees sterilization Temperature safety thermostats for the boiler and tank Audible warning system when washing is finished Can see error and fault codes on the device control panel Safety system that stops the operation of the device and turns off the tank heater when the door is opened Ability to wash plates with a maximum diameter of 290 mm and glasses with a height of 280 mm In case of a mains water cut, the detergent water in the machine will not mix with the mains water Washing and polishing pumps are imported, resistant to detergent deformation. Washing and rinsing arms and filters can be easily removed and installed for cleaning. Max. and min. Water levels can be controlled automatically with a pressure switch. Possibility to install a rinsing pump on the machine when necessary (where water pressure is not sufficient). Water inlet: 3/4″, 2-4 bar, 50?C, Washing water temperature: 55?C, Water consumption: 2, 7 Lt (for 90 seconds); 3.0 Lt (for 120/180 seconds) In order for the device to work efficiently, the inlet water must have a hardness of 7 Fr and a pressure of min 2 bar, max 4 bar. Options: Rinse pump: 370WDetergent pump: 8W