Inoksan Bym042 Glass Washing Machine, 40 Baskets/hour Capacity, Rinse Pump

?noksan Glass Washing Machine, Glass washing machine with rinse aid pump, Electronic, 4,15kW, 230 V AC 50Hz. / 208V 1N AC 60Hz (Optional) Dimensions: 460x560x730 mm Cassette capacity: 40 Pcs/h (40x40cm) Cup capacity: 600-800 Pcs/h Tank capacity: 13 Lt. Boiler capacity: 2.7 Lt Boiler power: 2.6kW Engine: 0.25 kW Tank Heater: 0.6 kW Cassettes: Imported (1 cup) AISI 304 quality 18/8 Cr-Ni stainless steel sheet on the active surfaces of the machine The cup cassette is made of heat-resistant plastic material, special for the purpose. The operating system of the machine is fully automatic, different stages of the washing cycle can be controlled with an electronic card. Ability to monitor the washing and rinsing water temperatures with 2 separate NTC probes from the device control panel. 3 different washing processes according to the type of dishes and the degree of contamination. program (Short wash 90 sec., Medium wash 120 sec., Long wash 180 sec.) 3-digit temperature display compatible with ?C or ?F, Washing-rinsing times and temperatures can be changed from the electronic card service menu according to the user’s request. When the washing process is completed, it automatically switches to rinsing. Providing rinsing with 85?C (185?F) water coming from the boiler. Thanks to the thermo-stop rinsing feature, it waits for the rinsing water to warm up during the washing process and guarantees the sterilization of the surfaces washed with 85?C (185?F) water. Temperature safety thermostats for the boiler and tank. When the washing is finished. Audible warning system Ability to see error and malfunction codes on the device control panel Safety system that stops the operation of the device and turns off the tank heater when the door is opened Inlet height 300 mm (maximum recommended cup height 290 mm) Check valve system that prevents the detergent water in the machine from mixing with the mains water in case of mains water cut-off Washing and Imported polisher pumps, resistant to detergent deformation. Washing and rinsing arms and filters can be easily removed and installed for cleaning. The upper and lower water levels in the tank can be controlled automatically with a pressure switch. Possibility to install rinsing and drain pumps on the machine when necessary (in places where the water pressure is not sufficient). inlet: 3/4″, 2-4 bar, 50?C Washing water temperature: 55?C Water consumption: 2.3 Lt In order for the device to work efficiently, the inlet water must be 7 Fr hard and at a min 2 bar, max 4 bar pressure. .Options: Rinse pump: 370 W Drain pump: 40 W Detergent pump: 8 W