Idose Df64e Single Dose and Electronic Dosing Coffee Grinder, Matte Black

idose DF64E Single Dose and Electronic Dosing Coffee Grinder, Matte BlackThree Dosing OptionsThe DF64E has three dosing options – single shot, double shot and manual dosing. These options can be selected from a touch screen menu. The single and double shot buttons are adjustable and when pressed the grinder will grind for a predefined time and then stop. This allows you to adjust the timing based on the amount of coffee you want to grind and makes it repeatable so you don’t have to measure the beans before using the grinder. The manual option allows the user to turn on the grinder and it will grind and grind until manually stopped.ApplicationsThe DF64E grinder is designed for use in single dose grinders or in coffee shops or home users where a compact unit is ideal.225g HopperThe DF64E has a 225g hopper which is allowing you to have enough coffee beans for multiple drinks without needing to refill.64mm Gear / SSP GearThe 64mm gear on this grinder will provide better particle size distribution compared to smaller diameter grinders, which is crucial to making the best flavored espresso possible is a direction. If you want to use SSP gears, we recommend getting the DF64 original burr due to the easier installation and calibration process. Low Clumping DesignThe grinder is designed to reduce clumping during the grinding cycle allowing for a more even water distribution during the espresso extraction process. 58mm Portafilter/Dosing Cup HolderThe grinder has a It is designed with a portafilter mount that will allow it to be used by grinding into a dosing container or grinding directly into a portafilter. Lower Gear Adjustment and Fixed gear Location With the design of the upper and lower gear carriers, the distance between the gears is designed to remain very constant and uniform throughout operation, providing more uniform particle size distribution. Since the lower gear is adjustable, the grinder can be disassembled, cleaned and reassembled without disturbing the grinding size. It is also easier to clean the gear chamber compared to the idose DF64 design, as cleaning involves removing two bolts with a metric hex wrench and turning a collar repeatedly.