Brother Be-438hx-03 Direct Drive Lockstitch Button Machine

Brother BE-438HX-03 Direct Drive Lockstitch Button MachineHigh quality sewing and easily adjustable sewing functions Wide range of sewing capabilities with expanded 50mm x 40 mm sewing area Production efficiency increased with the needle cooler system Standard sewing quality with the new digital tension system Very low noise and User friendly with working vibration Proven high efficiency “fastest operation time” Low power consumption and easy machine maintenance Half-oiled machine structure “Clean stitching without oil stains” Easy-to-use panel Machine structure produced with environmental awareness. Application: Button Operation Lubrication: Half Lubrication Maximum Sewing Speed: 2800 stitches/ minutesWheel Stand+Table+Motor is included. Disassembly is sent. The ideal take-up mechanism for every thin and thick fabric type. In addition to the new standard thread tension system designed for thick fabrics, a new take-up mechanism that can also be used on light and medium thickness fabrics has been developed for the new model Brother “H” series. New thread cutter shaft movement and better sewing starts With the new design thread cutter shaft movement, the remaining thread length at the end of sewing can be adjusted as standard. In addition, thanks to the renewed thread holder nipper, problems such as thread coming out of the needle at the beginning of sewing have been eliminated. This allows better sewing starts. Easy-to-use user panelThe operation panel is designed for extremely easy use. Sewing-related adjustments are extremely easy. Program settings: Settings such as sewing shapes, X axis, Y axis, sewing speed, upper thread orientation can be saved in the user program. 1-89 stitch designs (1-64 for BE-438F) are ready for use in the machine. You can change the parameters of these programs and save them in the machine. You can add 512 and above stitch designs to the machine memory and save them to memory addresses between 200-999 in the machine memory. (Machine pattern memory capacity may vary depending on the number of stitching steps on the pattern. “Clean stitching without oil stains” with its half-oil machine structure. All Brother bartack and button machines are designed as half-oil. In the machines, lubrication is provided only to the hook area, thus preventing oil leakage from the needle bar. and the problem of oil stains on the products has been eliminated. Not using a belt in the direct drive system also allows spotless clean seams. High energy saving. Power transfer loss is eliminated thanks to the direct drive system. Thanks to the redesigned engine, power consumption is 15% lower than previous models. In this way, it is much more efficient. Maximum power is achieved with less energy.Standard digital tension systemDigital tension is offered as a standard feature in Brother “H” series bartack and button machines.The machine keeps the thread tension and sewing quality constant until the operator changes the tension.The digital thread tension can be adjusted as easily as the mechanical thread tension in previous models. The tension can be adjusted very easily from the user panel or from the sewing design program. Operator-friendly sewing with very low sound level and working vibration. Brother’s new “H” series bar tack and button machines have lower and upper shaft and cyclic mechanisms, optimum sound and It has been designed to target vibration, thus ensuring less working stress and operator fatigue. It has been determined that it provides 20% lower noise and vibration compared to old models.